PCB-Spacer / support for 1.5mm mounting holes

Moderators: Oren.R, Aviad.H

ThomasR.
Posts: 8
Joined: Wed Jun 22, 2016 6:44 am

PCB-Spacer / support for 1.5mm mounting holes

Postby ThomasR. » Thu Oct 13, 2016 12:13 pm

Hi,

we want to mount the DART module via the 1.5mm mounting holes which are already existent.
Unfortunately it seems that pcb spacers in this dimension does not exsist. Ideally we would use spacers like this one:

http://www.digikey.com/product-detail/e ... -ND/392311

Do you have any recommendations?

Kind regards,
Thomas

Aviad.H
Posts: 67
Joined: Wed Dec 31, 2014 12:28 pm

Re: PCB-Spacer / support for 1.5mm mounting holes

Postby Aviad.H » Sun Oct 16, 2016 10:47 am

Hi,
The connectors can sustain very extensive vibrations and shocks and are used without additional mounting in most designs.
There are no off the shelf standoffs to match the SOM holes, companies that do use them have their own custom made standoffs.
As such we do not have a specific P/N we can recommend.
Aviad


Return to “Hardware”

Who is online

Users browsing this forum: No registered users and 0 guests

cron