VAR-SOM-DUAL MUX pin 16 Ethernet as GPIO

Moderators: Oren.R, Aviad.H

pierrelgcb
Posts: 33
Joined: Wed Dec 09, 2015 9:40 am

VAR-SOM-DUAL MUX pin 16 Ethernet as GPIO

Postby pierrelgcb » Mon May 22, 2017 11:20 am

Hello,

Working with VAR_SOM_DUAL including Ethernet option (during development step).
I don't need ethernet so I use pin 16 as GPIO1[28] on a custom board. I can' t get 1 or 0 level. I get 2,9V and 0,8V with 3,3V supply.

There is nearly 13kohms between pin 16 and GND.

Can I use pin 16 as GPIO on VAR-SOM-DUAL ?

Regards,
Pierre

pierrelgcb
Posts: 33
Joined: Wed Dec 09, 2015 9:40 am

Re: VAR-SOM-DUAL MUX pin 16 Ethernet as GPIO

Postby pierrelgcb » Wed May 31, 2017 12:30 pm

Answer from support :
On SOM with Ethernet, the signal is connected to 3.3K and to the Ethernet PHY pin which has some internal pull as well.
In a module with a no Ethernet you will have just a 3.3K to 3.3V so you will be able to use it as GPIO.


Return to “Hardware”

Who is online

Users browsing this forum: No registered users and 2 guests