ili9335 LCD support

Moderators: Oren.R, Eran.M, fradensky

Posts: 3
Joined: Wed Aug 24, 2016 1:34 pm

ili9335 LCD support

Postby jonver » Mon Aug 29, 2016 9:31 am


I wonder if the ili9335 LCD module is supported on the DART-6UL (using Yocto).
This LCD uses an 8-bit bus (with RGB565 data), which i'm trying to connect to the display port.

If this is supported:
1) how do I wire this?
2) what do I do to load the driver?


Posts: 65
Joined: Tue Dec 16, 2014 7:47 pm

Re: ili9335 LCD support

Postby Oren.R » Mon Aug 29, 2016 6:48 pm
shows how to configure the LCD port, with proper timings

Reference schematics are in our website, of the carrier board, including the display

Return to “Yocto”

Who is online

Users browsing this forum: No registered users and 1 guest