How to Configure to parallel RGB Display? [ANSWERED]

Moderators: Oren.R, Eran.M

JakeMoon
Posts: 2
Joined: Tue Oct 04, 2016 12:03 pm

How to Configure to parallel RGB Display? [ANSWERED]

Postby JakeMoon » Mon Feb 27, 2017 6:14 am

How to configure U-boot and kernel based on DART-MX6 board?

Eran.M
Posts: 140
Joined: Tue Jan 26, 2016 10:49 am

Re: How to Configure to parallel RGB Display?

Postby Eran.M » Mon Mar 06, 2017 4:49 pm

Hi Jake.
For instructions, please see the following Wiki page I've added:
DART-MX6 - Parallel RGB Display (lcd)

Regards,
Eran

JakeMoon
Posts: 2
Joined: Tue Oct 04, 2016 12:03 pm

Re: How to Configure to parallel RGB Display? [ANSWERED]

Postby JakeMoon » Thu Mar 16, 2017 2:32 am

Hi. Eran.M

I don't find "imx6qdl-var-solocb-dt6cb-displays.dtsi."

Where is this file?

Regards,
Jake.

Eran.M
Posts: 140
Joined: Tue Jan 26, 2016 10:49 am

Re: How to Configure to parallel RGB Display? [ANSWERED]

Postby Eran.M » Thu Mar 16, 2017 9:23 am

Hi Jake.
It is located in the 4.1.15 kernel code under arch/arm/boot/dts/, just as written in the Wiki.
Here: https://github.com/varigit/linux-2.6-im ... plays.dtsi

Since you didn't find it, I guess you are using an older version of Android, in which our device tree files are organized a little differently.
In that case, you'll need to manually patch it. The relevant device tree files are imx6qdl-var-dart.dtsi and imx6q-var-dart.dts.

Regards,
Eran


Return to “Android”

Who is online

Users browsing this forum: No registered users and 2 guests