I am trying to write the am33-som-nand_recovert-sd-Yocto-fido-20.img to an 8GB microSD card.
The command dd if=am33-som-nand_recovery-sd-Yocto-fido-20.img of=/dev/sdb bs=128k returns after 30 seconds with the following error:
dd: error writing "/dev/sdb": no space left on device
15323+0 records in
15322+0 records out
2008412160 byte (2,0 GB) copied, 31,7203 s, 63,3 MB/s
In spite of this error I tried to boot the target anyway. The board doesn't boot from SD (pressing the boot button while turning the board on), I can only see CCCCCC.
Where do I start to track the problem down?